The Mega Mantis Kit for the 350z/g35 is the most relevant angle kit in today’s drift society, and here’s why:
-Angle, 70 degrees depending on your steering rack/offset rack setup
-Ackerman, adjustable Ackerman
-Roll Center, optimized handling by adding 40mm of roll center correction
-Bump steer, minimal bump steer in drift by perfecting tie-rod pickup location
-Caster, displaced caster built into the knuckle for optimal alignment force
-Camber, optimized camber ranging from adjustable from -3 to -6
-Track Width, 50-75mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints, and spherical bearings with self-lubricating nylon race, easily replaceable
-Weight Reduction, compact knuckle design makes for a lightweight and strong design, scissor frame constructed alloy steel arms, 7075 aluminum used where possible
The kit includes everything you need to install
-2 lower control arms w/ compression arms
-2 upper control arms
-2 knuckles
-Ackerman Plates
– 2 inner and outer tie-rods
-All bearings and hardware required for install
Reviews
There are no reviews yet.